NovaStar MCTRL 4K

MCTRL 4K is a high-performance main controller for LED display systems developed by NovaStar. It is designed to drive and control ultra-large and ultra-wide LED displays.
Supports up to 4096 × 2160 @ 60Hz with one unit
Supports up to 4096 × 2160 @ 60Hz with one unit
Custom resolutions can be set within this range.
Custom resolutions can be set within this range.
Greatly simplifies large LED display setup
Greatly simplifies large LED display setup
Can be used as a standalone main controller
Can be used as a standalone main controller
Can also operate as two independent controllers
Can also operate as two independent controllers
Enables flexible display configurations for different applications.
Enables flexible display configurations for different applications.
Equipped with 1 DP and 1 HDMI
Equipped with 1 DP and 1 HDMI
Both inputs support HDCP
Both inputs support HDCP
16 Neutrik Gigabit Ethernet ports
16 Neutrik Gigabit Ethernet ports
1 fiber output
1 fiber output
Control interfaces: Ethernet, USB
Control interfaces: Ethernet, USB
Supports HDR10-Optima and HLG standards
Supports HDR10-Optima and HLG standards
Preserves detail in high-contrast scenes with natural color reproduction
Preserves detail in high-contrast scenes with natural color reproduction
Uses the Nova G4 engine
Uses the Nova G4 engine
Stable display without flicker or scan lines
Stable display without flicker or scan lines
Smooth video with rich gradation
Smooth video with rich gradation
Supports next-generation point-by-point calibration, white-balance correction and color-gamut matching
Supports next-generation point-by-point calibration, white-balance correction and color-gamut matching
Intelligent setup with an innovative architecture
Intelligent setup with an innovative architecture
Significantly reduces preparation time
Significantly reduces preparation time
Configure the display without a PC
Configure the display without a PC
Brightness can be adjusted manually from the front panel
Brightness can be adjusted manually from the front panel
Supports centralized control through cascading multiple units
Supports centralized control through cascading multiple units
Supports Genlock sync input
Supports Genlock sync input
Fully synchronizes large screens with external video sources
Fully synchronizes large screens with external video sources
Video output latency: 1ms or less
Video output latency: 1ms or less
Enables seamless, smooth display
Enables seamless, smooth display
Supports 3D
Supports 3D
Combines with compatible equipment for immersive 3D video
Combines with compatible equipment for immersive 3D video
10-bit color processing
10-bit color processing
Supports the BT.2020 wide color gamut
Supports the BT.2020 wide color gamut
Smooth gradation and rich color reproduction
Smooth gradation and rich color reproduction
Front panel: power button, USB port (firmware updates only, not PC control), status display and control knob
Front panel:
Power button
Power button
USB port for firmware updates; not for PC control
USB port for firmware updates; not for PC control
Status display
Status display
Control knob
Control knob
Rear panel: video input/output ports, control interfaces and power input
Rear panel:
Video input/output ports
Video input/output ports
Control interface
Control interface
Power input
Power input
Power supply: AC100–240V, 50/60Hz
Power supply: AC100–240V, 50/60Hz
Stadiums / Arenas
Stadiums / Arenas
Commercial facilities and large shopping malls
Commercial facilities and large shopping malls
Transport hubs (airports and stations)
Transport hubs (airports and stations)
Exhibition venues and convention centers
Exhibition venues and convention centers
Outdoor advertising / Large digital signage
Outdoor advertising / Large digital signage
Ideal wherever high-resolution, large-scale LED displays are required, including real-time information, advertising, sports broadcasts and immersive visuals.